STOP-SHOT™
HOW IT WORKS
STOP-SHOT™ Bullet Resistant glass is made
through a process of bonding multiple layers of annealed float glass and
tough polyvinyl butyral (PVB) under heat and pressure.
The resultant multi-layer product prevents
penetration by absorbing and spreading bullet impact force.
THE SPECIFICATION
STOP-SHOP™ Bullet Resistant glass of nominal
thickness (in mm) with (without) spoil protection to class (state class) of
(state standard) as made by Gulf Glass Industries, Sharjah, U.A.E.
MAKING A SELECTION
When selecting Bullet Resistant glass there
are several important criteria that must be reviewed.
These are:
- What is being protected?
- Threat expertise
- Potential weaponry
- Rear face splinter protection (spall)
After making a balanced judgement the
specifier can review the table in this brochure to help decide a glass
classification.
CCI can offer assistance to the specifier,
drawing on their experience to advise which STOP-SHOT glass will be most
suitable.
STOP-SHOT glass has been tested to
Internationally recognized standards at an Independent Test Laboratory in
the U.K.
Test reports can be made available on
application. |
|
| Type & Calibre of Weapon |
BS 5051:
Part 1:
1998 |
BS EN
1063:
2000 |
Glass Thickness |
Ammunition |
Test Range (m) |
Bullet Velocity (m/s) |
Nr. of Strikes |
Strike Distance (mm) |
| .22
RIFLE |
- |
BR1 |
19 |
Lead, round nosed bullet, 2.6g ±0.1 |
3
±0.5 |
360
±10 |
3 |
120
±10 |
HANDGUN
9mm Parabellum |
GO |
- |
23 |
9mm Mk 2Z standard bullet |
3 |
390
+30,-0 |
3 |
100
+10,-0 |
HANDGUN
9mm Luger |
- |
BR2 |
23 |
Full metal jacket (steel plated) round
nosed soft core bullet, 8.0g ±0.1 |
3
±0.5 |
400
±10 |
3 |
120
±10 |
HANDGUN
357 MAGNUM |
G1 |
- |
36 |
Soft point semi-jacketed flat nose bullet,
10.2g |
3 |
435
+30,-0 |
3 |
100
+10,-0 |
| - |
BR3 |
36 |
Full metal jacket (steel plated), soft core
coned bullet, 10.2g ±0.1 |
3
±0.5 |
430
±10 |
3 |
120
±10 |
HANDGUN
44 MAGNUM |
G2 |
- |
42 |
Soft point semi-jacketed flat nose bullet,
15g |
3 |
456
+30,-0 |
3 |
100
+10,-0 |
| - |
BR4 |
42 |
Full metal jacket (copper allay), soft core
flat nosed bullet, 15.6g ± 0.1 |
3
±0.51 |
440
±10 |
3 |
120
±10 |
| RIFLE
5.56 |
1-7 Twist |
R1 |
- |
42 |
NATO standard 5.56mm ball (SS 109) |
10 |
919
+30,-0 |
3 |
100
+20,-0 |
| Twist length 178mm
±10 |
- |
BR5 |
42 |
Full metal jacket (steel plated), soft core
and steel penetrator (type (SS 109) pointed bullet, 4.0g ± 0.1 |
10
±0.5 |
950
±10 |
3 |
120
±10 |
| RIFLE
7.62 |
1-7 Twist |
R2 |
- |
52 |
NATO standard 7.62mm ball |
|
815
+30,-0 |
3 |
100
+20,-0 |
| |
- |
BR6 |
52 |
Full metal jacket (steel plated), soft core
pointed bullet, 9.5g ± 0.1 |
10
±0.5 |
830
±10 |
3 |
120
±10 |
| |
Twist length 178mm ±10 |
- |
BR7 |
60 |
Full metal jacket (copper allay), steel
hardcore, (mass 3.7g ± 0.1, hardness more than 63 HRC) pointed bullet,
9.8g ± 0.1 |
10
±0.5 |
820
±10 |
3 |
120
±10 |
12 BORE
SHOTGUN |
586 |
- |
42 |
12 bore solid slug, mass 28.35g |
10 |
406
+40,-0 |
1 |
Center of test peice |
| - |
SG1 |
42 |
12 bore solid slug, mass 28.35g |
10
±0.5 |
420
±10 |
1 |
Center of test peice |
| - |
SG2 |
71 |
12 bore solid slug, mass 28.35g |
10
±0.5 |
420
±10 |
3 |
120
±10 |
|
| TECHNICAL DATA |
| STOP-SHOT THICKNESS |
2 - 71 mm |
| STOP-SHOT SIZES |
GO to S86 - 3210 x 2250 mm
BR1 to SG1 - 3210 x 2250 mm
SG1 - 1000 X 2250 mm
For other classifications, contact GGI |
CURVED, SHAPED OR SOLAR
CONTROL STOP-SHOT |
On application |
| STANDARDS |
BS 5051: part 1: 1988
BS EN 1063: 2000 |
|
|
|
